28-13-356-Rev1.0
5/9
BAR SLOT COVERS (OUTSIDE LEG)
Measure the Bar channel outside of
the Legs and subtract 20mm from this
measurement.
Using the remaining pieces of Slot
Cover from Step 12, cut to this
length and insert into the underside
channel of each Bar end as shown.
14
-20mm
SECURE END CAPS TO BARS
Insert the End Caps as shown. A Rubber
Mallet can be used to assist installation.
15
Secure using Plastite Screw. Tighten
using a #2 Phillips Head Screwdriver.
CHECK BAR LEGS ARE SECURE
Check all Bars/Legs are secure.
16
FIT LEG COVERS
Using the Keys and Covers supplied in
the LOCKN’LOAD Leg Kit, fi t and lock
all Leg Covers.
17
18
BAR KEYS
Place one key on the vehicle key ring and put the other away safely, or store with the spare
vehicle key.
Write the key number (which is stamped on the key) in the box provided. Replacement keys
are available from Yakima stockists, visit www.yakima.com.au or www.yakima.co.nz to fi nd
your nearest store or contact us directly on 1800 143 548 (AU) or 0800 4776 722 (NZ).
Key Number:
