28-13-336-Rev1
3/8
INSERT MOUNTING HARDWARE
- PLATFORM
Insert 4 x M6 Slot Nuts into the platform
channel where you want to mount your
light accessory. Refer to Step 6 for
positioning information.
4a
INSERT MOUNTING HARDWARE
- CROSSBAR
Insert 4 x M6 Spring Nuts into the
crossbar channel where you want to
mount your light accessory. Push Spring
Nuts down into crossbar channel and
twist to lock into place as pictured.
Refer to Step 6 for positioning information.
4b
x4
x4
NOTE -
Light Brackets can be fitted to all four
sides of the LOCKN’LOAD Platform.
SELECT CORRECT MOUNTING HARDWARE
Select the correct mounting hardware option as shown below. Platform uses M6 Slot Nuts
and Bars use M6 Spring Nuts.
=
=
4
ASSEMBLE BRACKETS
Assemble the Base Brackets and Arm Brackets
in the chosen orientation (refer to Step 1 for
configuration options) using 2 x M6 Washers 12 X
1.5mm, 2 x M6 Spring Washers and 2 x M6 Button
Head Screws 12mm as shown for each Bracket
assembly.
Tighten to all Screws to 7Nm with Torx Key
provided.
3
NOTE -
Example orientation shown is of Base down with Arms side
mounted angled down. This is best suited to mounting long Light Bars.
