Pull the lever up through the frame.
With the strap in place under
the rear crossbar, hook the tabs
back into the detents.
5
6
7
Lift HighRoad to route the rear strap under the rear crossbar.
Close the lever and adjust strap tension.
•
Strap tension can be adjusted by turning
the thumbwheel in both directions.
•
Adjust the strap tension with the
thumbwheel so the strap is tight around
the crossbar when the lever is closed.
•
The strap should be tight enough to prevent
the HighRoad from sliding on the crossbar.
•
If it slides on the crossbar, repeat step 7 to
tighten strap tension.
