;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
;;
@@
ÀÀ
Insert stabilizing
wedge to straps
with buckles.
Slip the strap edges under the
tabs in the wedge.
Insert strap end into center
hole from below buckle.
• Insert the strap end
through opening
with serrated edge.
Position the straps
inward.
ATTACH THE PLAIN
STRAPS TO THE FRAME.
ATTACH TUBE
SLEEVES TO BAR.
Attach the
pod covers.
Insert the skewer
while applying
pressure to the
pod cover.
ASSEMBLE STRAP SYSTEM:
Position the
pods to allow
for handlebar
clearance.
Use the supplied
hex wrench to
tighten the screws.
Assemble the two halves of
each pod onto the tube
sleeves.
(Single screw hole
indicates FRONT.)
Attach the
skewer nut.
Leave plenty
of skewer showing.
Pod covers must be
in place at all times
for safe operation of
bike carrier.
ASSEMBLE SKEWERS AND PODS:
