TROUBLESHOOTING
Fault
Remedy
Even though the batteries are
1.
Check and correct the battery polarities.
installed, there is either no
2.
Remove the batteries and wait for one
indication or an incorrect
minute. Then install the batteries or
indication on the LCD.
replace the batteries.
The cuff does not inflate
1.
Check the cuff position, re-fasten the
or the
cuff correctly and measure the
air pressure cannot rise.
pressure again.
2.
Check the cuff connection to
the monitor.
1.
Replace the batteries.
The low battery indication is
2.
shown on the LCD.
The unit cannot take your
1.
Re-fasten the cuff.
blood pressure, and the
2.
Relax yourself and sit down.
LCD shows an error
3.
Keep the cuff and heart at the same
message or a wrong
level during the measurement period.
result.
4.
Keep silent and still during measurement.
5.
If the patient has a severe heart beat
6.
problem, then the blood pressure may
not be read correctly.
Under normal measuring
1.
The variation is due to the different
circumstances a reading
environments.
at home is different from
2.
Your blood pressure is changing
one taken at a clinic or
according to the physiological or
two readings at home have
psychological status of the human body.
different values.
3.
Record your blood pressure each day and
consult with your physician.
If you have taken all of the above countermeasures, and blood pressure
still cannot be read, then the unit should be replaced.
Once BP700W enter sleep mode
(Bluetooth icon disappear), the measurement
you saved in the device will not be vanished if
you replace the batteries in 18 seconds. This
function provide user enough time to install
new batteries.
14