49
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
3
Are you sure?
This message is displayed before executing the Factory Set function. Press the [+1/YES] button to
proceed. Alternatively, press the [-1/NO] button to return to the previous screen.
NOTICE
If you set
PowerOn Auto
to “on” before executing the Factory Set function, the function will then execute
automatically whenever you subsequently turn on your stage piano. As this can result in the loss of
important settings and data, we recommend that this parameter normally be set to “off”. If you change the
PowerOn Auto
setting from “on” to “off”, you must execute the Factory Set function in this condition to
store the new setting.
02: Version
The Version screen can be used to review the current versions of the stage piano’s boot loader and
firmware in addition to copyright information.
NOTE
The Utility menu is the first screen displayed when the [UTILITY] button is pressed.
02: Version
selected in Step 3:
1
Job Version
This shows that you are on the Utility area’s Version screen.
2
Boot: (version number) Firm: (version number)
This shows the current versions of the stage piano’s boot loader and firmware.
3
(C)2013 Yamaha Corp.
This shows the owner of the copyright for the stage piano’s boot loader and firmware.
Procedure
1. Press the [UTILITY] button.
2. On the Utility menu, use the [
d
] button to select
07: Job
, and then press the [ENTER] button.
3. Use the [
d
] button to select
02: Version
, and then press the [ENTER] button.
Job
Boot:1
Version
(C)2
.00
Firm:1.00
013 Yamaha Corp.
1
3
2