CWSI YAGI ANTENNA INSTALLATION GUIDE
4 of 6
-Confidential -
Tuesday, August 02, 2011
the antenna type, the distance from the source Yagi antenna and the off-access angle of the "tapping"
antenna.
The back of the antenna is where the cable connector is located, the front is the opposite end furthest
away from the cable connector. Properly mounted the tines are aligned vertically in the same
orientation as the Omni Antennas on the Repeaters and the CP3000.
The following drawing shows the Ideal radiation patterns of a Yagi to Yagi antenna. These results were
determined during RF field measurements.
Note- All readings are subject to ideal testing conditions using Yagi antennas mounted at 8 to 15 feet
above ground and aligned for survey testing. Distances experienced by installers in the field are subject
to local conditions and variations in building construction. These distances are to be used as a guideline
and are subject to a final site survey for confirmation.
5
Sample Installations
ANTENNA PLACEMENT
