Do not expose the machine to water or other liquids.
Do not install or use the machine where it may come into contact
with water or other liquids.
Exposure to water or other liquid cam cause injury due to electric
shock, or failure of the machine.
Never modify or disassemble the machine.
This can cause injury or failure of the machine.
Always unplug, or the machine in, by holding the plug.
Never pull on the cord.
Pulling on the cord can result in an injury due electric shock.
Never place foreign object into the machine.
This can cause failure of the machine.
An operators presence is required whenever the machine in
operation.
Turn the machine off and unplug the cord when the operator is not
present.
Failure to observe this can result injury.
Do not cut or damage the power cord.
A cut or damage the cord can lead to electric shock, a short circuit
or possible fire hazard.
Make sure the cord is connected properly to the electrical outlet as
well as the receptacle on the back of the machine.
A loose connection can result in high heat or fire.
Do not use the machine in areas where moisture is present, high
temperatures exist or a high content of dust or dirt is present.
This can result in failure of the machine.
Always install and operate the machine on a flat, stable surface.
Dropping the machine can lead to failure of the machine or injury
to the operator.
Always remove the tape from the machine when you are finished
with the operation.
Leaving the tape in the machine may lead to a build up of adhesive
on the part, or cause the tape curl.
Caution
5