19
If the portable node is already connected to a node or a room on the Internet
③
When connected to the same node or room as the ID of the previous connection history
The current connection ID is displayed in the lower part of the LCD. To
communicate with this connection, proceed to “
Communicating with the
other station
” (page 24).
④
When connected to a node or room different from the previous connection history
The
“►” and the
current connection ID is displayed in the lower part of the
LCD.
When the
DIAL
knob is turned, the previous connection destination ID will
blink. In this case, press the
PTT
switch or touch [
blinking connection ID
] to
connect to the previous connection ID.
While operating the Portable Node, may be not possible to switch between “
Access Point
” and “
Direct Operation
”. Press
and hold the [
X
] key to return to the transceiver setting screen, then press the [
A/B
] key.
While operating the portable node, may be set and operate the following on the portable node transceiver.
Function
Key or Dial
Return to the transceiver setting screen
X key (Press and hold)
Squelch OFF
MONI key (While MONI key is pressed)
Adjusts the squelch level
SQL key and DIAL knob
Enters the BACKTRACK screen
DISP key
Enters the Set mode*
DISP key (Press and hold)
Displays the frequency display screen
V/M key
Displays the Function Menu Screen
[F MW]
Selects the Transmission Power Level
[TX PWR] in the Function Menu Screen
Selects Speaker Mute
A/B key
Disconnects a node or a room on the Internet
BAND key (Press and hold)
* Some setting items in the set mode are automatically set for the Portable Digital Node function, so the settings
cannot be changed.
Setting the speaker mute
You can mute the audio output of the speaker of the node station transceiver.
You cannot set it in Direct Operation.
Press [
A/B
] key each time toggles the mute mode as follows.
MUTE OFF
MUTE ALL
MUTE TX
MUTE RX
MUTE OFF
・・・
MUTE OFF
: Disable mute.
MUTE ALL
: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX
:
Mute the received voice from the C4FM digital station.
MUTE TX
:
Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the mute icon “ ” blinks at the top of the LCD.
In the Digital Portable Access Point, you can connect only to a Digital Room or a Digital Node. When connecting to an
analog node station, please use Portable HRI Mode.
When the frequency setting screen is displayed, the mute setting status is displayed for about 1 second on the screen
each time you press the
[A/B
] key.
