4
Transceiver
Select the Repeater operation mode from the following:
• RX:FM - TX:FM:
FM Analog repeater (WIRES Operation=Analog (fixed))
• RX:DIGITAL - TX:DIGITAL: C4FM Digital repeater (WIRES Operation=Digital (fixed))
• RX:AMS - TX:FM:
AMS to FM repeater (WIRES Operation=Analog (fixed))
• RX:AMS - TX:DIGITAL:
AMS to C4FM repeater (WIRES Operation=Analog (fixed))
• RX:AMS - TX:AMS:
AMS to AMS repeater (WIRES Operation=selectable)
Note
• When operating in RX:AMS mode, the WIRES-X system only relays the signal that is selected by the
WIRES Operation setting.
• When “HRI-REPEATER MODE” is started in either the “RX:DIGITAL-TX:FM” or “RX:FM-TX:DIGITAL”
state, the WIRES-X Node cannot operate.
Transceiver / DST / F/W version
Displays the data information of the digital transceiver in connection with the HRI-200.
Modulation
Displays the Voice CH wave format selected for repeater operation.(RX CH and TX CH)
• Digital: Displayed if using digital (C4FM) mode.
• Analog: Displayed if using analog (FM) mode.
• AMS: Displayed if using AMS(Automatic Mode Select) mode.
Frequency
Enter the WIRES-X operating frequency (RX CH and TX CH) in MHz.
The entered data will be displayed on the ID list.
Narrow deviation
Select if using Narrow deviation operation.
Note
This parameter cannot be set different for the RX and TX channels.
C4FM detect
Select the C4FM detection method for WIRES-X Digital operation.
• Signal:
Becomes busy state when receiving any signal.
• DSQ code: Becomes busy state only when receiving a signal with a matching DSQ code.
Digital SQL/Analog SQL
Enter the squelch code of the WIRES-X operating frequency (Voice CH frequency).
The entered data will be displayed on the ID list.
The following squelch codes are available:
Analog Operation
• NoTone: Not using CTCSS tone or DCS code squelch.
• ToneSQL: Using CTCSS tone squelch.
• DCS:
Using DCS code squelch.
If using ToneSQL, select the desired tone frequency (67.0-254.1 Hz).
If using DCS, select the desired DCS code (023-754).
Digital Operation
• DSQ: Select the squelch code (OFF or 001-126) exclusive to digital mode.
Note
• The SQL code parameter cannot be set different for the RX or TX channels.
• The analog SQL type can be set individually for the RX and TX channels.
• When making REMOTE settings in the TX INHIBIT function, there are some combinations that cannot be
set. (See the description of the TX INHIBIT function for details)
Power
Set the transmission power of the repeater connected to the Radio 1 terminal.
