VX-8GE O
PERATING
M
ANUAL
114
T
RANSMITTER
T
IME
-O
UT
T
IMER
(
TOT
)
The TOT feature provides a safety switch which limits transmission to a pre-programmed
value. This will promote battery conservation by not allowing you to make excessively
long transmissions, and in the event of a stuck
PTT
switch (perhaps if the radio or a
Speaker/Mic is wedged between car seats) it can prevent interference to other users as
well as battery depletion. As configured at the factory the TOT feature is set to OFF, and
here is the procedure for activating it:
1.
Press and hold the
m
key for one second to enter the Set Mode.
2.
Rotate the
DIAL
knob to select Set Mode Item
94: TOT
.
3.
Press the
m
key briefly to enable adjustment of this Set
Mode Item.
4.
Rotate the
DIAL
knob to set the Time-Out Timer to the de-
sired “Maximum TX” time. The available selections are 0.5
- 10.0 minutes (0.5 minute/step).
5.
When you have completed your selection, press the
PTT
switch to save the new setting and exit to normal operation.
To disable the Time-Out Timer, just repeat the above procedure, rotating the
DIAL
knob to
select “
OFF
” in step 4 above.
1) When your transmission time is within 10 seconds of the Time-Out Timer
expiration, an Alert bell will provide an audible warning from the speaker.
2) Since brief transmissions are the mark of a good operator, try setting up
your radio’s TOT feature for a maximum transmission time of 1 minute. This will sig-
nificantly improve battery life, too!
M
ISCELLANEOUS
S
ETTING
Содержание VX-8GE
Страница 71: ...VX 8GE OPERATING MANUAL 69 NOTE ...
Страница 125: ...VX 8GE OPERATING MANUAL 123 NOTE ...
Страница 165: ...VX 8GE OPERATING MANUAL 163 NOTE ...