Yaesu VX-5R, Руководство по эксплуатации

Страница: 54 / 76

VX-5R O
PERATING
M
ANUAL
52
The Smart Search feature allows you to load frequencies automatically according to where
activity is encountered by your radio. When Smart Search is engaged, the transceiver will
search above and below your current frequency, storing active frequencies as it goes (with-
out stopping on them even momentarily); these frequencies are stored into a special Smart
Search memory bank, consisting of 31 memories (15 above the current frequency, 15 be-
low the current frequency, plus the current frequency itself).
Two basic operating modes for Smart Search are available:
SINGLE SINGLE
SINGLE SINGLE SINGLE
Sweep: In this mode, the transceiver will sweep the current band once in
each direction starting on the current frequency. All channels where
activity is present will be loaded into the Smart Search memories;
whether or not all 31 memories are filled, the search will stop after
one sweep in each direction.
CONTINUE CONTINUE CONTINUE CONTINUE CONTINUE
: In this mode, the transceiver will make one pass in each direction as
with One-Shot searching; if all 31 channels are not filled after the
first sweep, however, the radio will continue sweeping until they are
all filled.
Setting the Smart Search Mode
•
Press the
[F/W]
key, then press the
[BAND(SET)AR]
key, to enter the Set mode.
‚
Rotate the
DIAL
to select Menu #35 (“
SMRT SRCH SMRT SRCH
SMRT SRCH SMRT SRCH SMRT SRCH
”).
ƒ
Press the
[BAND(SET)AR]
key to enable changing of this Menu item.
„
Rotate the
DIAL
to select the desired Smart Search mode (see above).
…
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
Storing Smart Search Memories
•
Set the radio to the VFO mode in the desired band.
‚
Press and hold in the
[F/W]
key for one second, then press the LAMP key.
ƒ
Press the
[VFO(DW)SC]
key to begin the Smart Search scanning.
„
As active channels are detected, you will observe the number of “loaded” channels
increasing in the regular memory channel window.
…
Depending on the mode you set for Smart Search operation (SINGLE or CONTINUE),
the Smart Search scan will eventually terminate, and the LCD will revert to Smart
Search Memory Channel 01.
†
To recall Smart Search memories, rotate the
DIAL
to choose from among the Smart
Search memories.
‡
To return to normal operation, Press the
[F/W]
key, then the
LAMP
key.
Smart Search is a great tool when visiting a city for the first time. You don’t
need to spend hours looking up repeater frequencies from a reference guide-
book... just ask your
VX-5R where the action is!
Smart Search Operation