Yaesu VX-451, Руководство по эксплуатации

Страница: 27 / 36

VX-450 S
ERIES
O
PERATING
M
ANUAL
25
T
ALK
A
ROUND
(
TA
)
Press (or press and hold) the assigned Programmable
key to activate the Talk Around feature when you are
operating on duplex channel systems (separate re-
ceive and transmit frequencies, utilizing a “repeater”
station). The Talk Around feature allows you to by-
pass the repeater station and talk directly to a station
that is nearby. This feature has no effect when you
are operating on “simplex” channels, where the re-
ceive and transmit frequencies are already the same.
When the “TA” function is activated, the “ ” icon
will be indicated on the display.
Note that your dealer may have mode provision for
“Talk Around” channels by programming “repeater”
and “Talk Around” frequencies on two adjacent chan-
nels. If so, the key may be used for one of the other
Pre-Programmed Functions.
A
DVANCED
O
PERATION
CALL/RESET
While the DTMF Paging System (VX-459 only)
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press (or press and hold) the
assigned Programmable key, followed by the three
digits representing the Page Call code of the station
you wish to call. Three tones will be heard after the
last key is pressed (the new code will now be trans-
mitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
While the 2-Tone/5-Tone Paging System
This feature, if enabled, press (or press and hold) the
assigned Programmable key to send a 2-tone/5-tone
sequential tone.
C
ALL
1
TO
C
ALL
5
Press (or press and hold) the assigned Programmable
key to send a 2-tone/5-tone sequential tone group
which is pre-defined.