11
Controls & Connections
M-1 Operating Manual
①
②
③④
⑥
⑤
POWER Switch
Position this switch for the desired operation of the M-1 power.
AUTO
: The M-1 power turns ON/OFF together with the power of the radio.
ON
: The M-1 power is always ON.
DC IN 5V Jack
Use the included power cable to connect to the included AC adapter.
r
The FT-991A and FT-891 can supply the needed power from the microphone
connector. By switching an internal slide switch (S1004), it is not necessary to
use the AC adapter. Please contact YAESU Technical Support for setting the in-
ternal slide switch.
Note:
Do not connect any power cables or any AC adapters other than
those provided with this microphone.
PHONES Jack
This jack is used to connect commercially available stereo headphones (3.5
mm jack).
Headphones can be used to monitor your own voice and recorded content.
Also, the transceiver audio may be monitored by connecting the RX AUDIO
IN terminal to the radio.
r
Use the MONITOR VOL knob to adjust the headphone audio volume level.
SIGNAL(L)
SIGNAL(R)
GND
Содержание M-1
Страница 1: ......