Yaesu FTM-500DR, Руководство для продвинутых пользователей

Страница: 57 / 74

57
SIGNALING
43 DTMF
Select the registered DTMF memory 0 to 9 and press PTT to automatically send the
DTMF code.
1. Press and hold the
FUNC knob

[ 43 DTMF ]

Press the FUNC knob
2. Rotate the FUNC knob to select the desired DTMF memory (1 to 9).
3. Press PTT .
For details, see “Transmitting DTMF code automatically using DTMF memory” (page
16).
NOTE : This item is registered in the custom function menu by factory setting.
44 DTMF MEMORY
Register the DTMF memory (maximum 16 digits, 9 channels) for automatic transmission
with the auto dialer.
1. Press and hold the
FUNC knob

[ 44 DTMF MEMORY ]

Press the FUNC knob
For details, see “Registering the DTMF memory” (page 16).
45 SQL TYPE
Selecting the squelch type in the analog FM mode.
1. Press and hold the
FUNC knob

[ 45 SQL TYPE ]

Press the FUNC knob
For details, see “Selecting the squelch type in the analog FM mode” (page 9).
NOTE : This item is registered in the custom function menu by factory setting.
46 TONE SQL FREQ / DCS CODE
Set the tone frequency or DCS code.
1. Press and hold the
FUNC knob

[ 46 TONE SQL FREQ ]* or [ 46 DCS CODE ]*

Press the FUNC knob
*The item name changes automatically depending on the setting of “42 SQL TYPE”.
NOTE : This item is registered in the custom function menu by factory setting.
47 SQL EXPANSION
The squelch type can be set separately for transmit and receive.
1. Press and hold the
FUNC knob

[ 47 SQL EXPANSION ]

Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
ON Add squelch types for signaling.
OFF Does not add squelch types for signaling.
48 PAGER CODE
The new pager code permits calls to specific stations only.
1. Press and hold the
FUNC knob

[ 48 PAGER CODE ]

Press the FUNC knob
For details, see “Setting the Code for this Station” (page 12).