Yaesu FTM-500DR, Инструкция по эксплуатации

Страница: 30 / 32

30
Deleting the registered nodes and rooms
Nodes and rooms registered in the 5 categories can be deleted.
1. Press and hold the
FUNC knob

[ 67 DELETE ROOM/NODE ]

Press the FUNC
knob.
2. Rotate the FUNC to select the desired category, then
press the FUNC knob.
1
2
3
4
TOKYO
– – – – – – – – – – –
>
FISHING
– – – – – – – – –
>
– – – – – – – – – – – – – – – –
>
– – – – – – – – – – – – – – – –
>
64 DELETE ROOM/NODE
WIRES-X
3. Rotate the FUNC to select the node or room to delete,
then press the FUNC knob.
The confirmation message appears.
CQ-JAPAN
JA1YOE-TKY-ROOM
– – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – –
C1 TOKYO
WIRES-X
4. Rotate the FUNC knob to select [ OK ], then press the FUNC knob.
Deletes the selected node or room.
5. Press the
DIAL
knob,
SUB DIAL
knob or
PTT
switch to save the setting and return
to normal operation.
The DG-ID feature to access the WIRES-X node station
Set the WIRES-X, DG-ID number used when connecting to the local node station by
pressing the [ D X ] key.
1. Press and hold the FUNC knob

[ 68 WIRES DG-ID ]

Press the FUNC knob.
2. Rotate the FUNC knob to select the DG-ID setting for
WIRES-X.
AUTO : Only open nodes, set to the DG-ID number
“00” may be connected.
01 to 99 : Only nodes matching the set DG-ID number
may be connected.
The default setting is “AUTO”.
AUTO
65
66
67
68
SEARCH SETUP
EDIT CATEGORYTAG >
DELETE ROOM/NODE >
WIRES DG-ID
WIRES-X
3. Press the DIAL knob, SUB DIAL knob or PTT switch to save the setting and return
to normal operation.