Yaesu FTM-350 - APRS, Руководство пользователя

Страница: 25 / 36

FTM-350 S
ERIES
APRS
®
M
ANUAL
25
E09: APRS RINGER
(
CALL
)
Function : Program the callsign, which causes a ringing bell sound when the “ 5 CALL
RINGER ” function of the Set Mode item “ E08 APRS RINGER ” is set to ON.
E10: APRS TXDELAY
Function : Select the transmission delay time between transmitting the APRS data and trans-
mitting a preamble (flag code) prior to the APRS data.
Available Values : 100ms, 150ms, 200ms, 250ms, 300ms, 400ms, 500ms, 750ms, or 1000ms
Default : 250ms
E11: APRS UNIT
Function : Selects the unit for the APRS operation.
Available Values : 1 POSITION: . mm’ or ’ ss”
2 DISTANCE: mile or km
3 SPEED: mph, knot, or km/h
4 ALTITUDE: ft or m
5 BARO: mb, mmHG, inHg, or hPa
6 TEMP: °F or °C
7 RAIN: inch or mm
8 WIND: mph, knot, or m/s
Default : Depends on the transceiver version.
E12: BEACON INF SELECT
Function : Sets the TX Beacon format.
Available Values : 1 AMBIGUITY: OFF, 1digit, 2digits, 3digits, 4digits
2 SPD/CSE: ON or OFF
3 ALTITUDE: ON or OFF
Default : 1 AMBIGUITY: OFF
2 SPD/CSE: ON
3 ALTITUDE: ON
AMBIGUITY: Cut off the selected digit below from the position data (Lat/Log).
SPD/CSE:
Enables/Disables transmission of the speed and course data.
ALTITUDE: Enables/Disables transmission of the altitude data.
APRS/PKT S
ET
M
ODE