3
FTM-3200DR/DE Advance Manual
Basic Operation
Microphone Gain Setting
The microphone gain has been programmed at the factory to a level that should be
satisfactory for the supplied MH-48A6JA Microphone. If an after-market microphone is
used, you may wish to set a different Mic Gain level.
1. Press and hold in the [
MHz
(
SETUP
)] key for
one second to enter the Set mode.
2. Rotate the
DIAL
knob to select “
MIC GAIN
23
”.
3. Press the [
MHz
(
SETUP
)] key, then rotate
the
DIAL
knob to select the desired micro-
phone gain level (LEVEL 1 - LEVEL 9).
Default:
LEVEL 5
4. Press and hold in the [
MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
RF Squelch
A special RF Squelch feature is provided on this radio, which allows setting the squelch so
that only signals exceeding a pre-set S-meter level will open the squelch.
Use the following procedure to set up the RF squelch circuit for operation:
1. Press and hold in the [
MHz
(
SETUP
)] key for
one second to enter the Set mode.
2. Rotate the
DIAL
knob to select “
RF SQL 32
”.
3. Press the [
MHz
(
SETUP
)] key, then rotate
the
DIAL
knob to select the desired signal
strength level for the squelch threshold (S1 -
S8 or OFF).
Default:
OFF
4. Press and hold in the [
MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
