11
Front Panel Controls & Switches
FTM-3100R/E Operating Manual
[
SQL
] key
Press the key briefly and rotating the
DIAL
knob to sets the squelch level.
[
REV
(
DW
)] key
During split-frequency operation, such as through a repeater, this key reverses the
transmit and receive frequencies.
Press and hold the key in for over one second to activate the Dual Watch feature.
Note:
For details, refer to the Advanced Manual (download from the Yaesu website).
[
TXPO
] key
Press the key briefly and rotating the
DIAL
knob to select the transmit power (HIGH:
65 W / MID: 30 W / LOW: 5 W).
[
MHz
(
SETUP
)] key
This key allows tuning in 1 MHz steps (the MHz digits will blink on the display).
Press and hold this key in for over one second to activate the Setup (Menu) Mode.
[
V/M
(
MW
)] key
Pressing this key briefly, switches between VFO mode and memory mode. Press and
hold the key for over one second to display the memory registration screen.
Power/Lock
key
Press and hold in this key for over one second to switch the power between ON and
OFF. Briefly pressing the key while the transceiver is turned ON engages or releases the
key lock.
Speaker
The internal speaker is located here.
LCD Display
The main digits on the display may show the operating frequency, memory name, or
any of many parameters during Menu setup.
S and TX Power Meter
Lock Feature Active
DTMF Memory Mode
SKIP/Preferential Scan Channel
Narrow Deviation
LOW/MID TX Power Selected
Memory mode
Memory Channel Number
Frequency/Message
Area
HOME Channel
CTCSS/DCS/EPCS Bell Paging
CTCSS
(Continuous Tone Coded Squelch System)
DCS (Digital Code Squelch)
Repeater Shift Direction
