Yaesu FTM-3100E, Руководство для продвинутых пользователей

Страница: 17 / 33

17
Scanning
FTM-3100R/E Advance Manual
Memory Skip Scanning
When some memory channels are continuously active, you may wish to skip them during
scanning , but still have them available for manual selection .
To mask a memory to be skipped (only) during scanning, use the following procedure:
1. Set the radio to the Memory Recall mode by
pressing the [ V/M
(
MW
)] key repeatedly, as
necessary, until “ ” and a channel number
appear on the right side of the display.
2. Rotate the DIAL knob to select the Memory
Channel to be skipped during scanning.
3. Press and hold in the [ MHz
(
SETUP
)] key for
one second, then rotate the DIAL knob to
select “ SCAN SKP 32 ”.
4. Press the [ MHz
(
SETUP
)] key, then rotate
the DIAL knob to select “SKIP”. The current
Memory Channel will now be ignored during
scanning.
VOL
DIAL
D W M W
SETUP
REV V / M M H z
SQL TXPO
VOL
DIAL
D W M W
SETUP
REV
SQL TXPO
V / M M H z
5. Press and hold in the [
MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
Blinks
A blinking “ ” icon will appear when you recall
the “skipped” memory channel manually.
To reinstate a channel into the scanning loop,
select “OFF” in step 4 above, after first recalling
the currently blocked channel (the “Skipped”
channel is accessible via manual channel
selection methods using the
DIAL
knob in the
Memory mode, whether or not it is locked out of
the scanning loop).
Blinks