Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 54 / 67

54
41 DTMF MEMORY
Register the DTMF memory (maximum 16 digits, 9 channels) for automatic transmission
with the auto dialer.
1. Press and hold the [
F
MENU
] key

[ 41 DTMF MEMORY ]

Press the DIAL knob
For details, see “Registering the DTMF memory” (page 16).
42 SQL TYPE
Selecting the squelch type in the analog FM mode.
1. Press and hold the [
F
MENU
] key

[ 42 SQL TYPE ]

Press the DIAL knob
For details, see “Selecting the squelch type in the analog FM mode” (page 9).
NOTE
: This item is registered in the custom function menu by factory setting.
43 TONE SQL FREQ / DCS CODE
Set the tone frequency or DCS code.
1. Press and hold the [
F
MENU
] key

[ 43 TONE SQL FREQ ]* or [ 43 DCS CODE ]*

Press the DIAL knob
*The item name changes automatically depending on the setting of “42 SQL TYPE”.
NOTE
: This item is registered in the custom function menu by factory setting.
44 SQL EXPANSION
The squelch type can be set separately for transmit and receive.
1. Press and hold the [
F
MENU
] key

[ 44 SQL EXPANSION ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
ON Add squelch types for signaling.
OFF Does not add squelch types for signaling.
45 PAGER CODE
The new pager code permits calls to specific stations only.
1. Press and hold the [
F
MENU
] key

[ 45 PAGER CODE ]

Press the DIAL knob
For details, see “Setting the Code for this Station” (page 12).
46 PR FREQUENCY
Set a no-communication squelch CTCSS tone from 300 Hz to 3000 Hz in 100 Hz steps.
1. Press and hold the [
F
MENU
] key

[ 46 PR FREQUENCY ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired CTCSS tone frequency.
300Hz to 3000Hz (100Hz steps)
47 BELL RINGER
The beep may be set to sound an alert when a call is received from another station.
1. Press and hold the [
F
MENU
] key

[ 47 BELL RINGER ]

Press the DIAL knob
For details, see “Notification of a Call from a Remote Station by the Bell Function” (page
13).