Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 9 / 67

9
Communicating with specified stations in the Analog FM mode
Selecting the squelch type in the analog FM mode
1. Press the [ F
MENU
] key

[ SQL ]

Press the DIAL knob
or press and hold the [ F
MENU
] key

[ 1 FREQUENCY
INPUT ]
2. Rotate the DIAL knob to select the type of squelch,
refer to the table below.
3. Press any key (except Power Switch) or PTT switch to
finish the setting and return to the original screen.
KEYPAD
SQL
RPT-R
DTMF
SCAN
OFF
HOME
TXPWR HIGH
AUTO
ARS
TONE 100.0
APRS OFF
OFF
Tone squelch (CTCSS), DCS and the New PAGER (EPCS) functions do not operate in
the C4FM digital mode. Press the [ D X ] key to change to the Analog FM mode, or turn
the AMS function ON.
Squelch type
Description
OFF
Deactivates the CTCSS and DCS functions. Returns to the normal
squelch operation in the Analog FM mode.
T-ENC
(TONE ENC)
Activates the CTCSS tone for Analog FM Transmissions. Receives
with normal squelch operation.
T-SQL
(TONE SQL)
Activates the CTCSS tone squelch function on Analog FM receive.
REV-T
(REV TONE)
Activates the reverse tone function. Used to monitor communications based
on the squelch control system. When a signal contains the designated tone,
the squelch is not opened, and when the tone signal disappears, the squelch
opens, and communication starts.
DCS
Activates the Digital Code Squelch (DCS) function. The DCS code
may be selected from 104 codes (from 023 to 754).
PRFRQ
(PR FREQ)
Activates the no-communication squelch function for radios. The no-
communication signal tone frequencies may be specified within the
range of 300 Hz to 3000 Hz in steps of 100 Hz.
PAGER
Activates a new two-tone CTCSS pager function. When
communicating with transceivers among friends, specify personal
codes (each code is composed of two tones) so that only specific
stations are called.
D-ENC*
(DCS ENC)
Transmits the signal containing the DCS CODE. Receives as a
normal squelch operation.
T-DCS*
(TONE DCS)
Sends a tone signal when transmitting, and receives only signals with
a matching DCS code.
D-TSQ*
(DCS TSQL)
Sends a DCS CODE when transmitting and receives only signals that
contain a matching tone signal when receiving.
* Press and hold [ F
MENU
] key

[ 44 SQL EXPANSION ]

Press the DIAL knob to access
“ON”, “D-ENC (DCS ENC)”, “T-DCS (TONE DCS)” and “D-TSQ (DCS TSQL)” setting
values are activated.