Yaesu FTM-10R, Техническое дополнение

Страница: 13 / 64

13
FTM-10R/E Technical Supplement
DCS TX Deviation
1. Press the key repeatedly to display the fre-
quency.
2. Set the transceiver frequency to 146.050 MHz.
3. Press and hold the
key for one second to
enter the Menu mode.
4. Rotate the DIAL knob to select Menu Item "
F44 TX POW- F44 TX POW- F44 TX POW- F44 TX POW- F44 TX POW-
ER ER ER ER ER
".
5. Press the
    
key, then rotate the DIAL knob to select
"
LOW
".
6. Press the
    
key, then rotate the DIAL knob to select
Menu Item "
F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE
".
7. Press the
    
key, then rotate the DIAL knob to select
"
DCS
".
8. Press the key to save the new setting and
exit the Menu mode.
9. Press the key repeatedly to display the
Alignment Menu.
10.Press the
    
key repeatedly to select Alignment Menu
Item "
A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx
".
11.Key the transmitter (with no microphone input), ro-
tate the DIAL knob to adjust the transmit DCS devia-
tion to 0.7 kHz (±0.05 kHz) on the deviation meter.
12.Press the key repeatedly to display the fre-
quency.
13.Set the transceiver frequency to 440.050 MHz.
14.Press the
key repeatedly to display the
Alignment Menu.
15.Press the
    
key repeatedly to select Alignment Menu
Item "
A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx A-4 DCS. xxx
".
16.Key the transmitter (with no microphone input), ro-
tate the DIAL knob to adjust the transmit DCS devia-
tion to 0.7 kHz (±0.05 kHz) on the deviation meter.
17.Press the key to save the new setting and
exit the Alignment Menu mode.
CTCSS TX Deviation
1. Press the key repeatedly to display the fre-
quency.
2. Set the transceiver frequency to 146.050 MHz.
3. Press and hold the
key for one second to
enter the Menu mode.
4. Rotate the DIAL knob to select Menu Item "
F44 TX POW- F44 TX POW- F44 TX POW- F44 TX POW- F44 TX POW-
ER ER ER ER ER
".
5. Press the
    
key, then rotate the DIAL knob to select
"
LOW
".
6. Press the
    
key, then rotate the DIAL knob to select
Menu Item "
F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE F40 SQL TYPE
".
7. Press the
    
key, then rotate the DIAL knob to select
"
TONE ENC
".
8. Press the
    
key, then rotate the DIAL knob to select
Menu Item "
F39 SQL TSQF F39 SQL TSQF F39 SQL TSQF F39 SQL TSQF F39 SQL TSQF
".
9. Press the
    
key, then rotate the DIAL knob to select
"
100.0 HZ
".
10.Press the key to save the new setting and
exit the Menu mode.
11.Press the key repeatedly to display the
Alignment Menu.
12.Press the
    
key repeatedly to select Alignment Menu
Item "
A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx
".
13.Key the transmitter (with no microphone input), ro-
tate the DIAL knob to adjust the transmit CTCSS devi-
ation to 0.7 kHz (±0.05 kHz) on the deviation meter.
14.Press the key repeatedly to display the fre-
quency.
15.Set the transceiver frequency to 440.050 MHz.
16.Press the
key repeatedly to display the
Alignment Menu.
17.Press the
    
key repeatedly to select Alignment Menu
Item "
A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx A-5 CTC. xxx
".
18.Key the transmitter (with no microphone input), ro-
tate the DIAL knob to adjust the transmit CTCSS devi-
ation to 0.7 kHz (±0.05 kHz) on the deviation meter.
19.Press the key to save the new setting and
exit the Alignment Menu mode.
Alignment