11
Before Use
Safety Precautions (make sure to read these)
Do not use the device when the
power cord and connection cables
are damaged, and when the DC
power connector cannot be plugged
in tightly.
Please contact our company amateur
customer support or the retail store
where you purchased the device as this
may result in fire, electric shock and
equipment failure.
Never cut off the fuse holder of the
DC power cord.
This may cause short-circuiting and
result in ignition and fire.
Do not use fuses other than those
specified.
Doing so may result in fire and
equipment failure.
Do not allow metallic objects such
as wires and water to get inside the
product.
This may result in fire, electric shock
and equipment failure.
Refrain from using headphones and
earphones at a loud volume.
Continuous exposure to loud volumes
may result in hearing impairment.
Disconnect the power cord
and connection cables before
incorporating items sold separately
and replacing the fuse.
This may result in fire, electric shock
and equipment failure.
Follow the instructions given when
installing items sold separately and
replacing the fuse.
This may result in fire, electric shock
and equipment failure.
Do not use the device when the
alarm goes off.
For safety reasons, please pull the
power plug of the DC power equipment
connected to the product out of the AC
socket.
Never touch the antenna as well. This
may result in fire, electric shock and
equipment failure due to thunder.
CAUTION
Do not place this device near a
heating instrument or in a location
exposed to direct sunlight.
This may result in deformation and
discoloration.
Do not place this device in a location
where there is a lot of dust and
humidity.
Doing so may result in fire and
equipment failure.
Stay as far away from the antenna as
possible during transmission.
Long-term exposure to electromagnetic
radiation may have a negative effect on
the human body.
Do not wipe the case using thinner
and benzene etc.
Please use a soft and dry piece of cloth
to wipe away the stains on the case.
For safety reasons, switch off the
power and pull out the DC power
cord connected to the DC power
connector when the device is not
going to be used for a long period
of time.
If not, this may result in fire and
overheating.
Do not throw or subject the device to
strong impact forces.
This may result in equipment failure.
Do not the put this device near
magnetic cards and video tapes.
The data in the cash card and video
tape etc. may be erased.
Do not turn on the volume too
high when using a headphone or
earphone.
This may result in hearing impairment.
