43
B
a
s
ic
O
p
e
ra
tio
n
s
Communicating
Communicating in FM mode
1
Select the desired operating band.
2
Set the modulation mode to “MANUAL (FM)”.
3
Rotate the DIAL to tune to the desired frequency.
4
While pressing and holding
[PTT]
, speak into the microphone.
Tip
To use the half deviation, select “1 ON” from
[2 TX/RX]
[9 HALF DEVIATION]
in the Setup menu.
Communicating using the repeater
The FTM-100DR/DE includes the ARS (Automatic Repeater Shift) function which
permits communication through repeaters automatically, by simply setting the receiver to
the repeater frequency.
1
Tune to the repeater frequency.
2
Press the
[PTT]
to transmit.
*: Depends on the transceiver version.
Tip
From the Setup menu, you can change the repeater setting.
Tone Calling (1750 Hz)
If your transceiver is FTM-100DE (European version), press and hold in the program
tone will be superimposed on the carrier. Once access to the repeater has been gained,
you may release the
[P1]
key, and use the
[PTT]
for activating the transmitter thereafter.
