Yaesu FTdx5000 Series, Руководство по эксплуатации

Страница: 61 / 148

Page 59 FT
DX
5000 O
PERATING
M
ANUAL
CONTOUR C
ONTROL
O
PERATION
I
NTERFERENCE
R
EJECTION (S
IGNALS WITHIN
3
KHZ
)
Refer to Figure “
B
”, and notice the initial position of
the contour when the [
CONT
] button is pushed. Ob-
serve the “indentation” in the receiver passband where
the contour filter is placing a low-Q “notch” (accord-
ing to the setting of Menu item “
113 RDSP CNTR
LV
”, as described on the previous page). Counter-
clockwise rotation of the [
SELECT
](contour) knob
causes the indentation to move toward a lower fre-
quency (to the left) within the passband, while clock-
wise rotation causes the indentation to move toward a
higher frequency (to the right) within the passband. By
removing the interference or unwanted frequency com-
ponents on the incoming signal, it is possible to make
the desired signal rise out of the background noise/
interference, and significantly enhance intelligibility.
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
A B C