Yaesu FTDX5000 CAT BOOK, Руководство по эксплуатации

Страница: 125 / 148

Page 123 FT
DX
5000 O
PERATING
M
ANUAL
KEYER G
ROUP
026 KEY CW MEM2
Function : Permits entry of the CW message for message
register 2.
Available Values : TEXT / MESSAGE
Default Setting : MESSAGE
TEXT: You may enter the CW message from the
FH-2 ’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
027 KEY CW MEM3
Function : Permits entry of the CW message for message
register 3.
Available Values : TEXT / MESSAGE
Default Setting : MESSAGE
TEXT: You may enter the CW message from the
FH-2 ’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
028 KEY CW MEM4
Function : Permits entry of the CW message for message
register 4.
Available Values : TEXT / MESSAGE
Default Setting : MESSAGE
TEXT: You may enter the CW message from the
FH-2 ’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
029 KEY CW MEM5
Function : Permits entry of the CW message for message
register 5.
Available Values : TEXT / MESSAGE
Default Setting : MESSAGE
TEXT: You may enter the CW message from the
FH-2 ’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.
M
ENU
M
ODE
022 KEY BEACON
Function : Sets the interval time between repeats of the
beacon message.
Available Values : OFF / 1s ~ 255 sec
Default Setting : OFF
023 KEY NUM STL
Function : Selects the Contest Number “Cut” format for
an imbedded contest number.
Available Values : 1290 / AUNO / AUNT / A2NO / A2NT
/12NO / 12NT
Default Setting : 1290
1290: Does not abbreviate the Contest Number
AUNO: Abbreviates to “A” for “One,” “U” for “Two,”
“N” for “Nine,” and “O” for “Zero.”
AUNT: Abbreviates to “A” for “One,” “U” for “Two,”
“N” for “Nine,” and “T” for “Zero.”
A2NO: Abbreviates to “A” for “One,” “N” for “Nine,”
and “O” for “Zero.”
A2NT: Abbreviates to “A” for “One,” “N” for “Nine,”
and “T” for “Zero.”
12NO: Abbreviates to “N” for “Nine,” and “O” for
“Zero.”
12NT: Abbreviates to “N” for “Nine,” and “T” for
“Zero.”
024 KEY CONTEST
Function : Enters the initial contest number that will in-
crement/decrement after sending during contest QSOs.
Available Values : 0 ~ 9999
Default Setting : 1
A
DVICE
:
Press the [ CLEAR
] button to reset the contest number to
“1.”
025 KEY CW MEM1
Function : Permits entry of the CW message for message
register 1.
Available Values : TEXT / MESSAGE
Default Setting : MESSAGE
TEXT: You may enter the CW message from the
FH-2 ’s keypad.
MESSAGE: You may enter the CW message from the
CW keyer.