Yaesu FTA-230, Руководство по эксплуатации

Страница: 34 / 56

FTA-230 O
perATing
M
AnuAl
32
s
cannIng
o
peratIon
The
FTA-230
allows you to scan automatically in the
VFO 
1
, Main Memory, “Book” Memory, or Weather
Channel 
2
modes. It pauses on signals encountered, so
you can talk to the station(s) on that frequency, if you
like.

1: In the VFO mode, the automatic scanner is only
available in the COM band (118.000 - 136.975
MHz); when the scanner reaches the uppermost
frequency in the COM band, it will revert to the bot-
tom end of the COM band and repeat the scanning
process until you cancel the scanning process.

2: USA version only.
If you wish to scan in the NAV band (108.000 - 117.975
MHz), you can do so manually, as described below.
Scanning operation is basically the same in each of the
above modes.

Press and hold in the
[ (
SET
)] key for
2
seconds to start the
automatic scanner up-
ward (toward a higher
frequency or a higher
channel number).

When the scanner encounters a signal, the scanner
will halt on that channel and will hold there for five
seconds, after which scanning will resume.

While the scanner remains paused on a frequency,
the decimal point of the frequency displays blinks.
The display will be illuminated unless the Scan
Lamp Feature is turned off.

To change the scan direction, turn the DIAL selector
knob one click in the opposite direction  .

To stop the automatic
scanner, press the
PTT
switch or the [ ENT
(
)] key momentarily.
You may also just press
the [ (
SET
)] key.

: If you change a function of
DIAL
and [

]/
[

] key by pressing the [
F
] key followed by the
[
5
(
DIAL/

)] key, you may change the scan direc-
tion by pressing the [

]/[

] key in the opposite
direction.