10
Connecting to a Faraway Station Using WIRES-X
When is displayed, rotate the DIAL. Call signs
of nodes and rooms on the Internet you previously
connected to flash.
Tip
While [
X
] is flashing, briefly press the
key to re-establish connection to the local node.
Tip
When any local node cannot be found, [
X
] will disappear in 30 seconds.
Caution
WIRES-X can only be used on the A-band.
If using the B-band (shown on the bottom part of the screen) as the operation band, pressing the
key automatically switches the operation band to the A-band (shown on the top part of the
screen).
Connecting to a node or room on the Internet
You can connect to the desired node or room in one of the following ways:
• Selecting an accessible node or room from the list
• Specifying the node name or room name
• Selecting the most recently connected node or room
• Specifying the DTMF ID of the node or room you want to connect to
●
Searching from the node & room lists
1
While displaying the local node, touch
[SEARCH &
DIRECT]
.
Displays the category list.
2
Touch
[ALL]
.
Displays the list of accessible nodes and rooms.
Tips
• Connection destinations are displayed from the room list
and then node list.
• On the connection destination room columns, the number
of activities (the number of nodes connected to each room)
appears on the right side.