Yaesu FT1DR, Техническое дополнение

Страница: 10 / 62

FT1DR/DE Technical Supplement
Alignment
ALIGNMENT-4
Rotate the
DIAL
knob to select the Alignment
Menu " HI POWER ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Power Meter reading is
4.9 W (±0.05 W).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
TX Power (L3) Adjustment (L3 POWER)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " L3 POWER ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Power Meter setting is
2.5 W (±0.1 W).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
TX Power (L2) Adjustment (L2 POWER)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " L2 POWER ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Power Meter setting is
0.9 W (±0.1 W).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
TX Power (L1) Adjustment (L1 POWER)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " L1 POWER ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Power Meter setting is
0.1 W (±0.02 W).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
Digital TX Deviation Adjustment (DIG DEV)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " DIG DEV ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
P r e s s t h e [
B A N D
] b u t t o n t o s e l e c t t h e
“DIG DEV”. (Don't touch alignment menu
"
VCO MOD ")
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Deviation Meter setting is
4.5 kHz ± 0.1 kHz (Both USA and EXP version).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
TX Deviation Adjustment (MAX DEV)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " MAX DEV ".
Set the AF Signal Generator output to 50 mVrms
with a 1 kHz audio tone.
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit and rotate the
DIAL
knob so that the Deviation Meter setting is
4.35 kHz ± 0.05 kHz (USA version) or 4.65 kHz
± 0.05 kHz (EXP version).
Release the
PTT
switch, and then press the
[
V/M
]
button (the "
E
" icon will disappear on the
display).
CTCSS TX Deviation Adjustment (100.0 Hz)
Connect the test equipment as shown in Figure 1:
TX Alignment Setup.
Rotate the
DIAL
knob to select the Alignment
Menu " 100.0 Hz ".
Press the [
V/M
]
button (the "
E
" icon will appear
on the display).
Press the
PTT
switch to transmit without the
microphone input and rotate the
DIAL
knob
so that the Deviation Meter setting is 0.65 kHz
(±0.05 kHz).