Page 39
FT-
991
Operating Manual
Band Stack Operation
The
FT-991A
utilizes a triple band-stack VFO selection technique that permits storing of up to three favorite frequen-
cies and modes onto each band VFO register. For example, one frequency each on 14 MHz CW, RTTY, and USB may
be stored and then recalled by successive, momentary touches of [
14
] on the screen displayed by the
BAND
button.
Each Amateur band key may similarly have up to three frequency/mode settings applied. Note that only the VFO-A sys-
tem has the band stacks.
A typical setup, for the 14 MHz band, might be arranged like this:
1. Program 14.025 MHz, CW Mode, then press the
BAND
button, and then touch [
14
] on the LCD.
2. Program 14.080 MHz, RTTY Mode, then press the
BAND
button, and then touch [
14
] on the LCD.
3. Program 14.195 MHz, SSB Mode, then press the
BAND
button, and then touch [
14
] on the LCD.
To individually recall each of the three stored operating
states, press the
BAND
button, and then touch [
14
] on
the screen repeatedly.
【BAND】
【14】
【BAND】
【14】
【BAND】
【14】
BAND Button
C.S
(
Custom Switch
)
The front panel
C.S
button may be programmed to directly access an often-used Menu Mode selection.
C.S Setup
1. Press the
MENU
button to engage the Menu mode;
the Menu list will appear on the display.
2. Rotate the
MULTI
knob to select the Menu item you
want to access with the front panel
C.S
button.
3. Press the
C.S
button to lock in your selection.
4. Press the
MENU
button or touch [
BACK
] on the
LCD to save the new configuration and exit to nor
-
mal operation.
Menu Selection Recall via C.S button
Press the
C.S
button.
The programmed Menu item will appear on the display.
Press the
MENU
button or touch [
BACK
] on the LCD
exit to normal operation.
MULTI Knob
C.S button
MENU button
Convenience Features
Advice:
The 5MHz band stack may be recalled by touching and holding [
14
] on the LCD in a similar operation.
Содержание FT-991A
Страница 1: ...HF VHF UHF All Mode Transceiver FT 991 Operating Manual...
Страница 156: ...Page 154 FT 991 Operating Manual Note...