Yaesu FT-920, Руководство по эксплуатации, Страница: 72 / 98

FT-920 Operating Manual
70
stored in a special Menu Bank which allows you to
recall them quickly by pressing and holding in the
[S
TEP
] key while pressing another key. These Menu
Items are shown below:
For example, here is how to use the Panel Menu fea-
ture to activate the Display Dimmer:

Press and hold in the [S
TEP
] key.
‚
While you are holding in the [S
TEP
] key, press the
[D
ISPLAY
] key. Menu U-08 will appear just to the
left of the “DIMMER” title, and “oFF” will blink in
the main display area. This means that the cur-
rent condition of the Dimmer is Off.
ƒ
Rotate the VFO-B Tuning Dial to select “on;” you
will note that the display just got darker.
„
Press the [ENT] key on the keypad. You may now
rotate the VFO-B Tuning Dial if you want to change
some other Menu Item, or just press [M
ENU
] to
exit the Menu System and resume normal opera-
tion.
Quick Menu Operation
The Quick Menu feature allows
you to select certain
Menu Items you feel the need to change more fre-
quently. These are assembled into Quick Menu bank
which operates almost identically to the “Normal”
Menu mode. However, access is very slightly differ-
ent:
r
When you have created a Quick Menu, you
activate it by pressing [M
ENU
] momentarily (as
described above in the “Normal Menu Opera-
tion” section). You now only have access to
the Quick menu Items.
r
To gain access to the other “Normal” Menu
Items, press [M
ENU
] and hold it in for ½ sec-
ond (instead of pressing it momentarily).
After you have done one of the above actions with
the [M
ENU
] key, operation is identical to that described
in the “Normal Menu Operation” section.
The Quick Menu bank is set up by first accessing
Menu Item U-67 via Normal Menu operation. For il-
lustrative purposes, we shall create a Quick Menu
bank consisting of Menu Items U-01, U-02, and U-
03:

Press the [M
ENU
] key momentarily to enter the
Menu mode.
‚
Rotate the VFO-B Tuning Dial to select Menu Item
U-67. The Title for this item is “Q MENU,” and
the default value is “U-01 oFF.”
ƒ
Press the [E
NT
] key to enter the Menu Item Com-
mand mode. The “U-01 oFF” display will blink.
„
Now press the [U
P
p
] key to change the “oFF” to
“on” relative to U-01.
Rotate the VFO-B Tuning Dial to select Menu Item
U-02 . Again press [U
P
p
] to change the “oFF” to
“on.”
†
Rotate the VFO-B Tuning Dial to select Menu Item
U-03. Again press [U
P
p
] to change “oFF” to “on.”
‡
Press the [E
NT
] key to lock in the new settings for
U-67, then press [M
ENU
] to exit.
ˆ
Now press [M
ENU
] momentarily, and rotate the
VFO-B Tuning Dial. You will see that you have
access only to Menu Items U-01, U-02, and U-03.
Press [M
ENU
] to exit.
‰
Press and hold in the [M
ENU
] key for ½ second,
then rotate the VFO-B Tuning Dial. You will see
that you now have access to all Menu Items. Press
[M
ENU
] to exit.
We will now provide a summary chart showing the
Menu Items available, followed by a more compre-
hensive description of each Menu Item and the
choices available.
Menu Mode Summary Chart
p
Me nu # Func tion D e scri pt ion
P re ss this ke y whi le
Holdi ng in [ S
TE P
] ke y
U-0 8
Display Dimmer On/Off [
D
ISP LA Y
] K ey
U-0 9
Mul ti Panel Display Choice [
A B
] key
U-1 0
Enhanced Tuning Scale
Display
[
M
E TER
S
E LEC T
] K ey
U-2 4
"V OX" Hang Time i n CW
Mode
[ B
K
-I
N
] K ey
U-3 7
(TX) CTCSS Tone
Fr equency
[ R
P T
] K ey