Yaesu FT-8800R, Руководство по эксплуатации

Страница: 55 / 72

53 FT-8800R Operating Manual
P
ROGRAMMING THE
K
EY
A
SSIGNMENTS
Default FT-8800R key functions have been assigned to Microphone’s [ P1
]/[
P2
]/[
P3
]/[
P4
]
buttons (
MH-48
A6J
, [
ACC ]/[ P ]/[ P1 ]/[ P2 ] buttons: MH-42
B6JS
) at the factory. These may
be changed by the user, if you wish to utilize another function on one of these keys.
To program the function assigned to a key:
1. Press the [
SET ] key momentarily to enter the Set mode.
2. Rotate the “ Main ” band DIAL knob to select the Menu Item to be configured (“#28
PG
P1 ,” “#29 PG P2 ,” “#30 PG P3 ,” or “#31 PG P4 ”).
3. Press the “ Main ” band DIAL knob momentarily, then rotate the “ Main ” band DIAL knob
to select the function you wish to assign to the button you selected in the previous step.
4. Press the [ SET
] key to save the new setting, then rotate the “
Main ” band DIAL knob to
select another programmable button to modify, if desired, and repeat the above steps.
5. Press and hold in the “ Main ” band DIAL knob for 1/2 second to exit to normal operation.
M
ISCELLANEOUS
S
ETTINGS
Press and hold the button
When the “ Main ” band is set to the Memory
mode, press and hold in this button for 1/2 sec-
ond to shift to the “Memory Tuning” feature.
Opens the Squelch on the “Main” band to al-
low un-muted reception.
Activates 1750 Hz Tone Burst.
—
—
When the “ Main ” band is set to the Memory
mode or Home Channel, press and hold in this
button for 1/2 second to switch the memory
channel display between the “Frequency” for-
mat and “Alpha-numeric Tag” format.
—
Allows tuning in 10-MHz step on the “ Main ”
band VFO.
Press this button momentarily to selects Re-
peater Shift direction on the “
Main ” band.
Activate the Priority Scanning.
Switches operating band on the “ Main ” band.
Activate the Smart Search Feature when the
“
Main ” band is set to the VFO mode.
Activate the “Memory Bank” feature when the
“
Main ” band is set to the Memory mode.
Function
SCAN
SQL.OFF
TCALL
RPTR
PRI
LOW
TONE
MHz
REV
HOME
BAND
VFO
/
MR
Press the button
Activate the Scanner on the “ Main ” band.
Opens the Squelch on the “Main” band to
allow un-muted reception.
Activates 1750 Hz Tone Burst.
Selects Repeater Shift direction on the
“
Main ” band.
Activates the Priority feature on the “ Main ”
band.
Selects the transmit power output level on the
“
Main ” band.
Activates the CTCSS or DCS operation on
the “
Main ” band.
Allows tuning in 1-MHz step on the “ Main ”
band VFO.
Reverses the transmit and receive frequencies
during split-frequency operation.
Switches operation to the “Home” channel
on the “
Main ” band.
Toggles the “ Main ” band of operation
between the “ Left ” band and “ right ” band.
Switches frequency control between the VFO
and Memory modes on the “
Main ” band.