background image

r

eset

 p

rOCedures

In the event of erratic operation of the transceiver, it is possible that data on the 

microprocessor may have become corrupted. While this is a highly unusual sit-

uation, the only path to recovery may involve resetting of the microprocessor. 

Here’s how to do this:
1.  Turn the radio off.

2.  Press and hold [

MONI

] and [

PTT

] switch and turn the radio on simultane-

ously.

3.  Press [▲] [▼] key to select one choice from the reset menu:

Display

Operation

F1 SET RESET

Reset the Set Mode settings to factory defaults.

F2 MEM RESET

Clear the Memory settings to factory defaults.

F3 BANK RESET

Clear the Memory Bank assignments.

F4 ALL RESET

Clear the All memories and other settings to factory defaults.

F5 MEM-ONLY

Operation on the Memory only.

F6 VHF-ONLY

Operation on the VHF Band only.

F7 UHF-ONLY

Operation on the UHF Band only.

F8 FM-ONLY

Operation on the FM-RADIO only.

F9 CLONE

Clone mode.

4.  Press the 

F/W

 key momentarily to complete the reset procedure.

24

FT-65R/E Operating Manual

Application for FCC / IC 

FCC ID: K6620665X20 / IC: 511B-20665X20

Содержание FT-65R/E
































Отзывы: