Yaesu FT-65 User Manual
9
Press
FT-65 Dual Display – the undocumented feature
How Dual Display Works
34 VFO.SPL to OFF
Overview
* Transmit happens on the main band (top frequency display).
* The settings in the display are for the main band.
* Receive happens on both A & B, but only one at a time unless the FM radio is being listened to.
* FM broadcast radio can only be received on B band.
The Three Screens
VFO
VFO
Memory
Press *V/M
Press *V/M
A
is the main band
B
is the main band
You are in
memory
mode
Medium power 2.5W
High power 5W
Low power 0.5W
144.010
–
repeater shift
UHF simplex
Local repeater with + offset
With Digital Coded Squelch
No squelch tone is set
Tone Squelch (TX & RX)
The alpha name and frequency
are shown for memory 081
#BAND button
#BAND button
#BAND button
VHF -> UHF -> VHF
VHF -> UHF -> FM -> VHF
memory offset tuning (page 33)
Listening to FM broadcast stations
FT-65R/FT-65E Operating Manual
page 22
•
Press the *V/M button until
B
is on top
•
Press the BAND# button to cycle to the FM broadcast
•
Type in the station frequency or
•
Search for a station by holding down an arrow key
i.
Press the arrow key when found (the decimal point will stop blinking)
ii.
B
will flash when a station is heard
Quick Reference
*V/M
A
B
B
A
M
↩
#BAND
UHF
FM
VHF
↩
Dual/single display:
1 )Hold the
PTT
and
Monitor
(single line) buttons while turning the radio on
2) Move in the menu to F8:DUAL DISP 3) Press the
Function
(two lines) button
-
DCS
A
145.290
B
430.000
M
A
145.290
B
430.000
+
TSQ
L
081
M
M
LOCAL-R1
147.300
