Yaesu FT-5100, Техническое дополнение

Страница: 17 / 100

Servicing
Pilot Lamp Replacement
D Remove the top and bottom covers, as
shown in
Case Disassembly on page 1-2.
D
Pull the knobs off the panel, and unscrew
the ring nuts affixing the mic jack and the
tuning shaft (you may be able to do this
with long-nose pliers, or have your dealer
do it with a special wrench).
D
With a jeweler's screwdriver, remove the
tiny screw on the circuit board just left of the
mic jack, and then remove the circuit board.
D
Referring to Figures 1 and 2 , unsolder the
old bulbs and install the replacements.
D
Reassemble the transceiver in the reverse
order of the above.
PL4001
NR.
nd 90'
PL4002
�
'--Keep leads straight.
PL4003
sleeve (0.
7 </> X
4mm)
on
I
wire
Figure 1
FT- 5100 Technical Supplement
PL4002
PL4003
Figure 2
2 - 7