Yaesu FT-4VR, Руководство по эксплуатации

Страница: 21 / 40

19
Registering to Memory Channels
1. Set the frequency and the communication mode
to be registered to a memory channel.
2. Press and hold the [ MR ] key.
A blank memory channel will be displayed auto-
matically.
3. Press the [

] key or [

] key to select the desired
channel number.
4. Input the memory tag
Use the numeric keys to input the characters.
If not inputting a “Tag” (label), proceed to step 5.
Input Character
Example: Press the [ 2 ] key repeatedly to toggle
among the following available charac-
ters.
2 → A → B → C → a → b → c → 2 → ···
Memory Channel
Number
Press the function key to move the cursor.
5. Press and hold the [ MR ].
The beep sounds and the memory is saved.
Memory Recall
1. While operating in the VFO mode, press the [ MR ] key to enter the Mem-
ory mode.
The memory channel most recently used appears on the LCD.
2. Press the [▲] or [▼] key to select the desired memory channel.
When the transceiver is already set to the Memory mode, an easy way to
recall a memory channel is to enter the memory channel number using
the numeric keypad.
3. Press the [ MR ] key to exit the memory mode, and return to VFO opera-
tion.
• To recall Memory Channel #200, enter “200”. To recall Programmable Memory
channels “ L01/U01 ” through “ L10/U10 ” enter “ 201/202 ” through “ 219/220 ”.
• The FT-4VR/VE may be set to operated only in the registered memory channels.
Press and hold the MONI/T.CALL key and the PTT switch simultaneously, while
turning the radio ON to enter the preferred operating mode.
In the preferred operating mode, press the [

] key or [

] key to select the [ F5
M-ONLY ], then press the function key to enter the Memory Channel Only mode.
To cancel the Memory Channel Only mode, press the [

] key or [

] key to
select the [ F5 M-ONLY ], then press the function key again.