background image

Advanced Operation

Weather Broadcast Reception (USA Version)

The 

FT-2980R

 includes a unique feature which allows reception of weather broadcasts in 

the 160 MHz frequency range. Ten standard Weather Broadcast channels are pre-loaded 

into a special memory bank.
To listen to a Weather Broadcast Channel:

1.  Press the Microphone’s [

P4

] button to recall the Weath-

er Broadcast channels.

2.  Turn the 

DIAL

 knob to select the desired Weather 

Broadcast channel.

CH

Frequency

CH

Frequency

01

162.550 MHz

06

162.500 MHz

02

162.400 MHz

07

162.525 MHz

03

162.475 MHz

08

161.650 MHz

04

162.425 MHz

09

161.775 MHz

05

162.450 MHz

10

163.275 MHz

3.  If you wish to check the other channels for activity by scanning, just press the Micro-

phone’s 

PTT

 switch.

4.  To exit to normal operation, press the [

P4

] button again. Operation will return to the 

VFO or Memory channel you were operating on before you began Weather Broad-

cast operation.

The [P4] key, one of the programmable keys, is assigned (default setting) as 

the “WX Broadcast” one-touch access key. Please note that if you change/

assign another function to the [P4] key, one-touch access to the WX channel will 

be unavailable.

Severe Weather Alert Feature

In the event of extreme weather disturbances, such as storms and hurricanes, NOAA (the 

National Oceanic and Atmospheric Administration) sends a weather alert accompanied 

by a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels. 

You may enable this feature via Menu Item “57 WX ALT”, if desired. See page 43 for 

details.

When scanning the band or the “regular” memories, with the Severe Weather Alert feature 

engaged, you will notice that the 

FT-2980R

 will break over to the Weather Channel bank 

every five seconds, performing a quick scan of those channels in search for the 1050 Hz 

alert tone. If the alert tone is received, operation will lock on the weather broadcast station 

issuing the alert; otherwise, the radio will revert to the VFO or memory scan session in 

progress without interruption.

When the alert tone is received, press the 

PTT

 button momentarily to disable the alarm, 

and the Severe Weather message will now be audible from the speaker.

16

FT-2980R Operating Manual

Содержание FT-2980R

















































































Отзывы: