Yaesu FT-270R, Руководство по эксплуатации

Страница: 43 / 88

FT-270R O
PERATING
M
ANUAL
39
S
CANNING
Preferential Memory Scan
The
FT-270R
also allows you to set up a “Preferential Scan List” of channels which you
can “flag” within the memory system. These channels are designated by a blinking “ ”
icon when you have selected them, one by one, for the Preferential Scan List.
When you initiate memory scanning, beginning on a channel with the blinking “ ” icon
appended, only those channels bearing the blinking “u” icon will be scanned. If you ini-
tiate scanning on a channel which does not have the blinking “ ” icon appended, you will
scan all channels including those with the blinking “ ” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1.
Recall the Memory Channel which you wish to add to the Preferential Scan List.
2. Press the [
F/L
] key, then press the [
MR/MW
(
SKIP
)] key to enter the “Skip” channel-
selection mode.
3. Rotate the
DIAL
knob so as to select “
ONLY
.”
4. When you have made your selection, press the
PTT
switch to
save the setting and exit to normal operation.
5. To remove a channel from the Preferential Scan List, just repeat the above procedure,
rotating the
DIAL knob to select “ OFF ” in step 3 above.
To initiate Preferential Memory Scan:
1.
Press the [
F/L
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 39: SCN MD .
3. Press the [ F/L
] key momentarily to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob so as to select “
ONLY
.”
5. Press the PTT switch to save the setting and exit to normal
operation.
6. Now, press and hold in either the [
(
MHz
)] or [ (
MHz
)] key
for one second to initiate the Preferential Memory Scan. Only the channels which have
the blinking “
” icon appended to the channel number will be scanned.
7. To cancel the Preferential Memory Scan, just repeat the above procedure, rotating the
DIAL
knob to select “
MEM
” in step 4 above
M
EMORY
S
CANNING