29
DTMF Operation
FT-25R/FT-25E Advance Manual
6.
Press the [1] - [0] key, the [P1] - [P4] key, [
MR
], [
#VFO
],or use the[▲] and [▼] keys
to select the first digit of the DTMF string.
7. Press the
F
key to accept the first digit and move to the next digit of the DTMF string.
8. Repeat step 6 - 7 to complete the telephone number.
To correct a mistake, press the
F
key repeatedly (or press and hold the F key and then
press the
F
key) until the cursor returns to the first character position and then begin
the DTMF Memory entry again.
9. Press and hold the
F
key to save the telephone number.
10. Press the
PTT
switch to return to normal operation.
To monitor and check the entered DTMF strings, repeat steps 1- 4
above, then press the [▲] or [▼] key to select the input register, and
then press the
MONI/T.CALL
key.
Sending the DTMF code by Autodialer
1. Press and hold the
F
key to enter the Set mode.
2.
Press the [▲] or [▼] key to select Set Mode Item “
12 DTMF SET
”.
3. Press the
F
key to enable adjustment of this Set Mode Item.
4. Press the
F
key, then press the [▲] or [▼] key to
select “
AUTO
”.
5. Press the
F
key to save the new setting.
6. While pressing the
PTT
switch to transmit, press a registered DTMF Memory key
[
1
] - [
9
].
7. Release the
PTT
switch.
The DTMF tone signals will continue to be transmitted until the number is completed.
To change the DTMF Autodialer sending delay and speed, use the Set
Mode Item “
12 DTMF SET
