Yaesu FT-2500M, Техническое дополнение

Страница: 22 / 67

Channel Display-Only Mode
Channel Display-Only Mode
You can use this feature when you need very simple operation: only stored memories can be
selected, and are displayed as
"[ 1-:. : ' c'
,
... " instead of the channel frequency or alphanumeric
name display. Indicators for
previously stored
settings such as repeater shift and tone squelch are
still displayed, although they cannot be changed. Only the settings listed below can be changed
as described
K
High/Mid/Low TX power and locking function: use
(t@ {8�)
to toggle
K
Volume
&
Squelch: same as before
K
Channel Selection:
DIAL
knob or microphone
UP/OWN
keys
K
Paging function selection: toggle
�
to select paging mode
K
Paging code memory selection: press
8=> �
and rotate
DIAL
knob to select
K CALL channel instant recall: press
�
to toggle
K
Priority channel recall: press to toggle
After programming memories, you can activate Channel Display-Only operation by turning
the transceiver off, then pressing and holding the
�
&
�
keys together while powering on
again. Repeat this step to return the transceiver to normal.
2-4
FT-2500M Technical Supplement