4
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●Increase the separation between this equipment and the receiver.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Disposal of your Electronic and
Electric Equipment
Products with the symbol (crossed-out wheeled bin) can-
not be disposed as household waste.
Electronic and Electric Equipment should be recycled
at a facility capable of handling these items
and their waste byproducts.
In EU countries, please contact your local
equipment supplier representative or service
center for information about the waste col-
lection system in your country.
Specifications
Frequency Range
: 1.8 MHz ~ 29.7 MHz ,
50 MHz ~ 54 MHz
Input Impedance
: 50 Ω
Maximum Power
: 100 Watts
Tune-up Power
: 4 W ~ 60 W
Tune-up Time
: 5
seconds or less
Impedance Matching Range
: 1.8 ~ 29.7 MHz = 16 Ω ~ 150 Ω
50 ~ 54 MHz = 25 Ω ~ 100 Ω
Impedance Matching Memories
: 100 channels
Input Voltage Requirement
:13.8 V ±15 % (supplied from transceiver)
Operating Temperature Range
: 14° F ~ 122° F (−10 °C ~ +50 °C)
Case Size (WHD)
: 6.1” x 1.8” x 8.3” (155 x 45 x 210.5 mm)
Weight
: 1.35 kg (3 lb.)
Specifications subject to change without notice or obligation.
YAESU MUSEN CO., LTD.
Tennozu Parkside Building
2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan
YAESU USA
6125 Phyllis Drive, Cypress, CA 90630, U.S.A.
YAESU UK
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
1608O-AO
YETA00412
