Activating the Set Mode
Use the following procedure to activate the Set Mode and configure the
transceiver parameters.
1. Press and hold the
F
key to enter the Set Mode.
2. Repeatedly press the [▲] or [▼] key to select the Set Mode Item to be
adjusted.
3. Press the
F
key momentarily to enable adjustment of the Set Mode Item.
4. Press the [▲] or [▼] key to adjust the level, or choose the parameter, of the
selected Set Mode Item.
5. After completing the selection and adjustment, press the
PTT
switch to
save the new setting and exit to normal operation.
Setting the Quick Recall Keys
The four keys (P1, P2, P3 & P4), are user pro-
grammable.
The four keys are assigned as shown
in the table:
Quick
Recall Key
Press
Press after pressing F key Press and hold
recall the
stored or
assigned
setting
HOME (Fixed setting)
store or assign
a setting to the
key
TX PWR (Fixed setting)
SQL TYPE (Fixed setting)
REV (Fixed setting)
Assigning Set Mode Items to the Quick Recall Keys (Set
Mode Recall feature)
1. Press and hold the
F
key to enter the Set Mode.
2. Press the [▲] or [▼] key to select the Set Mode Item to be assigned to the
quick recall key as a recalled Menu item.
The quick recall keys can store and recall favorite frequen-
cy settings, and are also short-cut keys to the Set Mode
menu items.
3. Press and hold the [
P1
], [
P2
], [
P3
] or [
P4
] key to assign the Set Mode Item
to the quick recall key.
4. Press the [
P1
], [
P2
], [
P3
] or [
P4
] key to recall the assigned Set Mode Item.
22
Basic Operation
FT-25R/FT-25E Operating Manual
Application for FCC / IC
FCC ID: K6620663X20, IC: 511B-20663X20
