3
/
4
Technical parameters:
Printer connection
A
、
Connect the power cord to the printer power supply.
B
、
Connect the USB cable to the port behind the printer.
C
、
Connect the cash box wire to the cash box connector at the back of the printer.
Note
：
1. When the printer power is turned off, connect it as above.
2. When connected by Bluetooth, the POWER supply lamp (silk screen POWER/ blue) is always
on, and the Bluetooth is flickered slowly when disconnected. Please refer to the App interface
operation guide for the Bluetooth connection method.
3. If the printer run out of paper, the ERROR light is always on (screen printing ERROR/ red), if
the printer appears other ERROR, then the ERROR light (screen printing ERROR/ red) flashes.
Paper installation
POS58 series printers use 58mm thermal paper rolls, it is an easy paper loading structure that
convenient for paper loading. The installation method of thermal paper is as follows:
(1) Open the printer cover,
(2) Input the thermal paper roller based on instruction as following,
(3) Pull the paper little out from the paper house and close the cover,
(4) Use the tear hole of the printer to remove the excess paper roll
①
②
1111
③
④
Printing
method
Direct line thermal
Interface type
BT+USB
Printing
speed
70mm/s
Reliability
50KM
（
continues paper
mode
）
Paper
width
58mm
Printer input
voltage
D C 8.5V/2A
Printing
density
384dot/line
Cashbox
control
D C 12V/1A
A
B
C
电 源
钱 箱
钱 箱
US
B
U SB
电 源
电 源
