Yadea YDX1, Руководство пользователя

Страница: 8 / 19

HOW TO USE
PART1 Scooter Assembly
Installation Steps
Connect the power cable within the handlebar to the
main line connector of the vertical stem, and install
the handlebar onto the vertical stem.
2
Lock the screws with the hex wrench within the
installation tool.
3
After installation completely, plug the charging
plug into the charging port and connect the
power supply to charge for
2-3 seconds to
activate the battery, and then you can turn on
the scooter to ride.
4
Unfold the stem and secure the folding wrench to
stabilize the scooter.
1
3
ʐ
Fix the scooter and stem during installation to avoid
injury caused by tipping.
4 ʐ Do not turn on the power supply before the installation is
completed. When installing components, please apply
appropriate force to avoid component damage or scooter
body failure.
1
ʐ
Please follow the instructions to install the
components. Improper installation may cause
safety risks.
2 ʐ When installing the handlebar, please set it in
the correct angle.
Attention