7.Check whether the power supply circuit and lighting circuit
are normal before driving. Whether the front and rear brakes
can work normally. Fixing handlebars and front wheels ,
rear wheels. Tyre pressure. Whether the reflector is damaged
or contaminated, etc. If there is any abnormality, please
contact YADEA authorized service station for repair or find
professional repair.
8.The installation of batteries for new scooters and
replacement of batteries for old scooters must be carried out
by professionals according to the "Battery Installation Work
Instructions" provided by our company. When the battery is
replaced, the connecting wire shall be replaced at the same
time and shall not be reused, and the original fittings of our
company shall be used. It is forbidden to put the battery
sideways or backwards.
9.Distributors and users are forbidden to wire or modify
the structural performance of scooters without permission.
Examples include: changing battery configuration,
changing route, increasing bulb power wattage, and
retrofitting muscle speaker.
10.It is forbidden to touch the live parts of the electric motor
with wet hands and metal conductors, such as battery box
socket, battery box connecting wire socket, charger power
plug, etc. Prevent electrical components from entering water;
When cleaning the scooter, avoid water from impacting the
charging socket, wiring harness connector, fuse and other
electrical components, and do not directly splash water
into the glove box
.
11.When replacing fuses, use fuses of specified models and
specifications. It is strictly prohibited to directly short the
wires without adding fuses. The fuse should be in good
contact with the slot. If it is loose, it may cause the fuse to
heat up and cause accidents.
12.Inflammable, explosive and other dangerous goods,
articles with low heat resistance, retained food and wet rain
gear shall not be put into the container.
13.Do not use chargers of other brands and specifications
for charging. It is also forbidden to use the charger provided
by our company to charge other electric motors.
14.When charging, connect the output plug of the charger
with the charging jack of the battery reliably, and then
07
08
