7
v. Plug the other end of the Power Adapter into an available 12/24v socket in your vehicle. Please note that
the cable should not wrap around the monitor, but should stay to the right of the Monitor and run down
the interior on the passenger side of your car. At no time should the Tiny Traveler™ Power or Connection
Cable be loose or dangling on the driver’s side of the vehicle.
CAMERA PLACEMENT
Note that the image in the Monitor will be a reversed image of the baby.
i. Before selecting which Camera mount to use, it is best to determine where in the car the Camera will best
be placed in order to capture the image of the baby seat. Make sure the camera is not located near the
airbag.
ii. If your baby seat is rear facing you have several options:
• Use the Headrest Mount to attach to the headrest of the back seat by pulling the vertical and horizontal
straps and securing with the strap lock. Camera should be mounted tightly to the headrest to that the
Camera is stable. The Camera can then be adjusted to angle accordingly to capture the entire baby seat.
The camera adjustment will take some force to change the angle.
