10
Initial Setup
Set the date & time before installing and using the Roadcam. This date & time is the time stamp
for all recorded media files and digital clock.
Switching Modes
Press and hold the button to cycle through the following modes: video mode > camera mode
> playback mode. The Roadcam cannot switch between modes while it is recording. Press the
button to stop recording and press and hold the button to switch between modes.
Video Mode
• This is the default recording setting. The Roadcam will start recording
automatically once it is turned on.
• Files are looped or recorded over by the default of 1 minute.
The MicroSD card will hold 1 minute segments and record over them as space is needed.
• Stop loop video: press the button once to pause or resume recording.
• Lock video: press the button during recording to lock that recorded file.
• Press the button during recording to turn the microphone on or off.
G-Sensor Setting:
The Roadcam’s integrated G-Sensor will automatically save and lock the
recorded file if activated by an impact event or accident. Select to turn the G-Sensor on or off.
The default setting is low.
Camera Mode
• Press the button each time you want to take a picture.
Playback Mode
• Press the and button to cycle through all the media files.
• Press the button to play video files and press it again to pause.
• Press the button to delete the file, press to confirm.
CONFIGURATION & MENU SETTINGS
