17
SPECIAL FUNCTIONAL DESCRIPTION
Automatic ON / OFF
When the Dash Cam is connected to the vehicle’s power, it will power on
and start recording when the vehicle engine starts. When the engine is
off, the Dash Cam will stop recording and turn off automatically.
Gravity induction
In case of vehicle collision, the Dash Cam will lock the broken video of
the accident and save it as a special image. At the same time, the icon of
the lock will be displayed in the middle of the display screen. The locked
image will not be covered by loops.
Note:
The G-Sensor supports sensitivity adjustment and it can be done
in the video setting page according to actual needs.
Park & Record function
The Park & Record function allows the Dash Cam to record videos
when it detects any vibration when the vehicle’s engine is off. Refer to
page 16 on setting up the parking monitor. The Dash Cam will turn on
automatically and record a 30 seconds video clip and then shutdown;
when it detects another vibration, it will do the same thing again.
Note:
The Dash Cam will switch to Park & Record mode only when the
vehicle’s engine is turned off. The Dash Cam will not switch to Park &
Record mode if it is turned off completely by pressing the power button
for more than 3 seconds.
