10
JUMP STARTING CONT.:
3. Connect the
RED
clamp to the POSITIVE
(+) post on the car battery. The POSITIVE
battery post will be slightly larger than the
NEGATIVE post, and will be marked with
a PLUS (+) sign. There may also be a
RED
plastic protective cover over the
positive battery post.
4. Connect the
BLACK
clamp to the
NEGATIVE(-) post on the car battery.
The NEGATIVE will be marked with a
MINUS (-) sign. There may be a
BLACK
plastic protective cover over the negative
battery post.
NOTE:
Do not connect the
RED
clamp
(+) and the
BLACK
clamp (-) at the same
time. Connect the
RED
clamp first, then the
BLACK
clamp.
CAUTION:
DO NOT lean directly over the
battery while making jumper connections.
5. Check the LED status on the Polarity Circuit Protection Box. Proceed
to the next step unless the LED is flashing
RED
and BEEPING.
Reference Polarity Protection Circuit Status chart in the next section.
6. You now have 90 seconds to start your vehicle before the Jump
Starter shuts off in order to prevent the vehicle battery from reverse
charging the unit.
indicator
light box